#  test with:
# $ modprobe 88XXau rtw_vht_enable=2
# $ hostapd -d hostapd.conf
#  you should be able to get 27 MB/s = 220 Mbps...

country_code=FR
# US: less rules
interface=wlan1
ssid=MYNETWORK
hw_mode=a
# 'ac' is defined by parameters below
driver=nl80211
ieee80211n=1
require_ht=1
ieee80211ac=1
require_vht=1
wmm_enabled=1
# QoS helps by adding 1 Mb/s
ht_capab=[HT40-][HT40+][SHORT-GI-20][SHORT-GI-40][MAX-AMSDU-7935][DSSS_CCK-40]
vht_capab=[HTC-VHT][MAX-MPDU-11454][SHORT-GI-80][TX-STBC-2BY1][SU-BEAMFORMEE]
channel=36
vht_oper_chwidth=1
vht_oper_centr_freq_seg0_idx=42
# needed for full speed, rarely supported ; occupy channels 36->42
macaddr_acl=0
# do not filter by MAC address
auth_algs=1
ignore_broadcast_ssid=0
# 2: broadcast an empty name, better than 1
wpa=2
wpa_passphrase=MYPASSWORD
wpa_key_mgmt=WPA-PSK
wpa_pairwise=TKIP
rsn_pairwise=CCMP